1-2.jpg

Single Flange Installation (2 of 4)

4. Slide the Termistop over the pipe and down to a position that will be in the center of the slab. Metal to metal contact may cause corrosion of the reinforcement over time. Make sure that the Termistop is not touching the steel reinforcement. If contact appears likely, apply a coat of non-leaded spray paint to the area where the Termistop will touch the reinforcement. Be careful not to spray the Termistop.

5. Tighten the clamp to secure the Termistop to the penetration. Be careful not to over-tighten the clamp, as this could strip the clamp and render it useless.